Payment & Shipping Terms:
|Power:||5V DC 1A||IP Protection:||IP68|
|Measuring Range:||10 Meters||Instrument Material:||ABS|
USB-UART Output Digital Ultrasonic Water Depth Meter with 10 Meters Cable
1. UDM-H Introduction
ultrasonic depth meter, also called echo sounder, device used on ships to determine the depth of water by measuring the time it takes a sound (sonic pulse) produced just below the water surface to return, or echo, from the bottom of the body of water. ultrasonic depth meter are in operation on practically every important class of ship, naval and merchant, and are also used on small craft. The device comes withe the LCD display , which can be handheld , can read the datas easily .
★Use various battery for power (5.5)
★Backup and recovery parameter set,
★Measure for level, volume, weight
★Free adjustment of analog output
★Set a filter value to remove
★Support Bluetooth, GPRS, GPS
★Customize serial port data format
★Support customize main display screen
★Support customize function calculation
★Support sound velocity variable for special medium
★Support SD card data collection
Range: 50 m blind zone :< 0.5 m (different for range)
Accuracy :±0.3％× maximum range
Minimum indication resolution: 1mm
Keyboard: 16 SMT tactile keys
Power: 5V DC 1A
Power consumption :< 0.3W for work
<0.03W for standby
Protection degree: IP60 for instrument
IP68 for sensor
Operating temperature: normal
Operating pressure: normal
Instrument material: ABS
Sensor material: stainless steel
Instrument dimension: 210mm×100mm×35mm
4. Model Guide
|Ultrasonic Water Depth Meter|
|50(50m)||GPRS( data communications)|
|100(100m)||GPS( Global Positioning System)|
5.Installation and precaution
1. Sensor should be vertical to the water surface.
2. There should be no shelter between sensor and bottom.
3. Sensor should avoid hitting floats in water, and we recommend installing self-cleaning system when there is floats adhesion on sensor.
4. Sensor should be installed at 20cm from water surface, and more than 50cm from wall. 5. measured shallow zone, sensor should be vertical to underwater reflecting surface.
Sensor interface is G1/2. We have prepared 2 stainless steel tubes, and sensor has been installing in baffle from factory. So connect stainless steel tube to sensor interface.
1, when charging, 1 must connect to ON
2, 2-4 for different battery voltage.
3, 5-6 for battery’s the max. current.
2: final voltage 2.9V
3: final voltage 3.6V
4: final voltage 4.2V
5: limited current 200mA
6: limited current 600mA
(1). Who is the manufacturer of the Ultrasonic Depth Meter?
UDM is manufactured by CNIRHurricane corp which focus on R&D Ultrasonic Instruments more than 13years. UDM is one of their hot selling models.
(2). What measuring range are available for optional?
10m , 20m, 50m is current hot selling models. Others can be customized.
(3). Could i order some samples for test ?
Yes , sample order is acceptable.